12
KEN002VKM
v1a • 17.04.2020
EN
STEP 2
Remove the plate (2) and the retaining screws (1) of each wall bracket. Turning adjusting screw (3) with a
hex key 6 mm counter clockwise. Measure the distance in Figure. This distance must be greater than 40 mm,
(when the distance equal to 45 mm, the angle of inclination of awning is 80 °). Must be the same distance for
all wall brakcets (4).
INSTALLATION DISTANCE FROM AWNING TO WALL OR CEILING
≥100mm
≥600mm
≥600mm
ceiling
wall
wall
MOUNTING OF THE WALL BRACKETS
STEP 1 CHOOSING THE RIGHT LOCATION
Suitable wall types:
reinforced concrete walls, brick walls. The chosen wall must be suitable to hold and
maintain the awning. We will not be responsible for any damage to persons, to the property and to the awning
due to weak support of installation wall.
Before mounting your awning, select the required mounting height (C) in accordance with the required angle
of slope (α°) and the front line (H) of the awning. To avoid head injuries, the front line (H) should always be
greater than your own height
L
α°
C
L=2.5m
L=3m
80°
H+450mm
H+520mm
75°
H+650mm
H+780mm
70°
H+850mm
H+1030mm
65°
H+1050mm
H+1270mm
60°
H+1250mm
H+1500mm
