Nemaxx HW-2, Оригинальная инструкция по эксплуатации

Страница: 11 / 63

Version: 2.0
30.03.2016
11
INSTALLATION
• Fix the two AA batteries into each battery box of the smoke alarm.
• According to the “Wireless function description” section, set the smoke alarm.
Ensure the wireless function is working.
• Then hold the bracket on the installation position, mark installation holes of the bracket
with a pencil.
• Make two installation holes with an electric drill.
Make holes of 5mm diameter, place the two plastic plugs into hole.
• Attach the bracket into the plastic plugs and fix tightly with the screws (3*25mm)
(refer to Diagram 3).
• Fit the alarm on the bracket and turn the alarm body clockwise, until matching well on
the bracket.
• Test smoke alarm using test button. The alarm will sound 3 short beeps – 1.5 seconds
pause, then repeat it until you release the button.
• If there is no sound, it indicates a defective alarm, you can refer to “Trouble shooting” for
solution or contact your retailer during legal warranty.
• If you have any questions on installation, you can contact your retailer.
• During testing, the other smoke detectors will sound an alarm.
Once you release the button, the other detectors will stop alarming after approx. 1 minute.
This is how you can test the wireless function.
EN
WARNING
To prevent injury, this unit must be securely attached to the ceiling in accordance
with the installation instructions.