PROGRAMMING INSTRUCTIONS
Set Interval Scheduling Option
Turn the large dial to the
SCHEDULE
position. The last scheduling option chosen for the
current program appears on the LCD. Press
SELECT
to scroll to the interval days
position. An arrow will appear on the LCD next to INT (Interval). Use the
ADJUST
to
choose interval days between watering (1-30). The date displayed is day one of the interval
schedule. (Today’s date if one has been set). To change day 1 date use
SELECT
to go to
the interval start date position. As needed, change the date for day one of the interval
schedule with
ADJUST
(can only be set up to 30 days out).
Repeat the above procedures for each program (A, B, or C), as you require.
That’s it! Your
EZ Pro™
is now programmed. Turn the
MODE
dial to the
AUTO
position to run
the program you entered.
NOTE: Programming an INTERVAL schedule deletes any other schedule for the selected
program.
PROGRAM REVIEW
To review the current program, Turn the
MODE
dial to the
PROGRAM
position and turn the
large dial to the setting you wish to review (i.e., turn the large dial to TIME to review the time
set for the controller). When you need to view different zones or run times (1, 2, 3), use the
SELECT
buttons only.
NOTE: Since you are in the program mode, the potential exists to change the program
accidentally.
17
