PROGRAMMING INSTRUCTIONS
Set Start Times
A START TIME is the time of day a program will start running. The
EZ Pro™
allows four start
times per program.
Turn the large dial to the
START TIMES
position. Press
SELECT
to select the start time
you want to set (1, 2, 3, or 4). Press
ADJUST
to set the time of day the program will start.
Repeat as needed.
Start Time Stacking
The
EZ Pro™
will stack start times if your program watering times overlap another start time.
The additional start time will begin when the first cycle finishes.
Set % Water Budget
% WATER BUDGET changes the duration of run times in a program by the percentage
entered 0 - 200% (i.e., a 10 minute run time at 50% water budget will run 5 minutes). This
feature is useful when changes in weather occur. If it is unusually dry, you may want to extend
your run time for each zone in a program. With % Water Budget, you can change one number,
and all run times in the program are adjusted. If 24 hours of run time is exceeded 24 hr will
flash on the LCD.
Turn the large dial to the
% WATER BUDGET
position. A % symbol will appear on the LCD to
let you know you are working on the % Water Budget amount. Press
ADJUST
to choose
the desired percentage amount.
14
