3
Delivery and transport
Page 19
Stud welding unit
operating manual
Date:
July 2021
ALPHA 850
07.2021 / EN
Rev.:
A
3
Delivery and transport
3.1 Scope of delivery
Delivery of the ALPHA 850 welding device includes the following device components
and accessory parts:
•
1 ALPHA 850 welding device,
•
1 ALPHA 850 operating manual.
3.2 Packaging and dispatch
Unless agreed otherwise, the packaging type corresponds to the HPE regulations
established by the Federal Association for Wood, Pallets and Export Packaging.
3.3 Incoming inspection
The welding device has been carefully inspected before delivery.
However, slight damage during transport is not always avoidable.
We therefore ask that upon delivery the welding device be inspected for transport
damage an for completeness of the parts included in delivery.
Any transport damage and/or missing parts must be reported to the manufacturer or
the authorized carrier company immediately.
3.4 Interim storage
If the ALPHA 850 welding device is not put into operation immediately after delivery,
it must be temporarily stored in a secured area.
The welding device must be adequately protected against dust and moisture. The
storage temperature can be found in the technical data (see Chapter 1.8).
3.5 Transport
To prevent damage to the welding device, the ALPHA 850 must be transported only
on the casters provided for the purpose, using the carrying handles, crane lugs or
with a suitable lift device.
The power supply cable must not be used as a carrying handle!
