2
Work safety
Page 18
Stud welding unit
operating manual
Date:
July 2021
ALPHA 850
07.2021 / EN
Rev.:
A
2.4 Warranty and liability
Warranty and liability claims regarding damage to people or property are void if they
can be traced to one or more of the following causes:
•
Unintended use of the ALPHA 850 welding device.
•
Failure to follow the operating manual of the ALPHA 850 welding device.
•
Failure to follow the operating manuals of the system components.
•
Improper start-up, operation or maintenance of the system.
•
Use of the welding system in residential and business areas.
•
Improper handling of the shielding gas consumption equipment.
•
Use in moist, combustible or explosion prone environments.
•
Start-up without properly attached safety equipment.
•
Start-up after improperly done repairs.
•
Start-up after repair done by unqualified personnel.
•
Independent design changes to the system.
•
Failure to adhere to the specified maintenance intervals.
The ALPHA 850 welding device is designed only for the range of application
indicated in Chapter 2.3 “Intended use”.
Before using the welding device outside its contractual range of use, Tucker GmbH
customer service must be consulted, or else the warranty will be void.
2.5 Copyright
The contents of this documentation is protected by copyright. They contain texts
and drawings of a technical nature that are not to be reproduced in whole or in part,
or used without authorization for purposes of competition or communicated to
others. Any use beyond that allowed by copyright law is prohibited.
Tucker GmbH
Max-Eyth-Str. 1
35394 Gießen
Phone:
+49 641 405 0
Fax:
+49 641 405 300
E-mail:
