-13-
C-Series 1" & 1-1/4" WS1 Manual
Set Time of Day
The user can also set the time of day. Time of day should
only need to be set after power outages lasting more than
8 hours, if the battery has been depleted and a power
outage occurs, or when daylight saving time begins or
ends. If a power outage lasting more than 8 hours occurs,
the time of day will flash on and off which indicates the
time of day should be reset. If a power outage lasts less
than 8 hours and the time of day flashes on and off, the
time of day should be reset and the battery replaced.
Step 1U
Press
SET CLOCK
.
Step 2U
Current Time
(hour):
Set the
hour of the day
using
p
or
q
buttons. AM/PM
toggles after 12.
Press
NEXT
to go to step
3U
.
Step 3U
Current Time
(minutes):
Set
the minutes of
the day using
p
or
q
buttons.
Press
NEXT
to exit Set Clock.
Press
REGEN
to return to previous step.
User Display Setting
Diagnostics
Error Message
If the word “ERROR” and
a number are alternately
flashing on the display
contact the OEM for help.
This indicates that the valve
was not able to function
properly.
STEP 1D
Press
p
or
q
simultaneously for three
seconds. If screen in
step
2D
does not appear in 5 seconds the lock on the
valve is activated.
To unlock press
q
,
NEXT
,
p
, and
SET CLOCK
in sequence,
then press
NEXT
and
q
simultaneously for 3 seconds.
STEP 2D
Days, since last
regeneration:
This
display shows the
days since the last
regeneration occurred.
Press the
NEXT
button
to go to Step
3D
.
Press
REGEN
to exit Diagnostics.
STEP 3D
Gallons, Since Last
Regeneration:
This
display shows the
number of gallons that
have been treated since
the last regeneration.
This display will equal zero if a water meter is not
installed.
Press the
NEXT
button to go to Step
4D
.
Press
REGEN
to return to previous step.
STEP 4D
Gallons, Reserve Capacity Used for Last 7 Days:
If the
valve is set up as a softener, a meter is installed and Set
Gallons Capacity is set to “Auto,” this display shows 0 day
(for today) and flashes the reserve capacity. Pressing the
or