background image

Digital Video Recorder Quick Start Guide   

Regulatory Information 

FCC Information 

Please take attention that changes or modification not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

 

FCC compliance: 

This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and 

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may 

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to 

cause harmful interference in which case the user will be required to correct the interference at his own expense.

 

FCC Conditions 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

1. This device may not cause harmful interference.

 

2. This device must accept any interference received, including interference that may cause undesired operation.

 

EU Conformity Statement 

This product and -  if applicable -  the supplied accessories too are marked with "CE" and comply 

therefore with the applicable harmonized European standards listed under the EMC Directive 

2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

 

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted 

municipal waste in the European Union. For proper recycling, return this product to your local 

supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection 

points. For more information see: 

www.recyclethis.info

 

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted 

municipal waste in the European Union. See the product documentation for specific battery 

information. The battery is marked with this symbol, which may include lettering to indicate 

cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a 

designated collection point. For more information see: 

www.recyclethis.info 

Industry Canada ICES-003 Compliance 

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. 

Содержание TVI



























Отзывы: