NELLY SECURITY TVI, Быстрый старт

Страница: 19 / 26

Digital Video Recorder Quick Start Guide
18
Figure 3. 10
Configure Signal Input Type
3. Click Apply to save the settings.

For this series DVR, each two video channels are grouped in sequence, e.g., CH01 and CH02, CH03 and
CH04..., and each two channels in the same group must be connected with the same type of video source
selected on GUI. For example, when the TVI/CVBS signal mode is selected, then either TVI or CVBS signal
input can be connected to the channels in the same group; and when the AHD signal mode is selected, only
the AHD signal input can be connected.

The default TVI/CVBS signal input type also supports the auto detection of 3MP signal. Each two types of
the signals can be mixed randomly.

In the live view interface, when there is no video signal of the analog channel, the corresponding connectable
video signal type message can be displayed on the screen.

The IP channels will not be displayed on the interface and you can view the max. IP camera accessible
number in the Max. IP Camera Access text field.
3.6 Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts
once the device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard. Follow
the guide of the Setup Wizard to configure the system resolution, system date/time, network settings, HDD
management, record settings, etc.