5. USE OF ACTUATOR IN SYNCRO³ VERSION
In the
SYNCRO
³ version the actuator has been equipped with the new system patented by
NEKOS for coordinated synchronisation of a group of actuators (up to eight at the same
time). Electronic control of speed is completely automatic device inside the actuator and
does not require any external control station: just connect the feeder cable communication
wires to each other
(see diagram on page 15)
5.1.
Recognition
Three elements differentiate the SYNCRO
The technical data label with the “..…
The SYNCRO label to one side of the technical data label on the
actuator
.
In the 230V ~ version, the power cord has 4 wires
5.2.
Use of a Syncro³
The Syncro³ version of the actuator is used when the window is particularly heavy or wide
(more than approximately 1,2 m wide)
of the window, especially in the corners, therefore making it necessary to h
retention points.
When a group of Syncro³ actuators is used, the movement of the window sashes occurs in
a synchronized manner, i.e., uniformly without interruptions and/or variations in the speeds
of the actuators. If one of the actuators
electronic problem, the other actuators stop as well, thereby guaranteeing the integrity of
the window. Recall that the force exerted by a group of actuators installed on the same
window sash is equivalent to the
assembling two actuators doubles the force exerted on the window.
IMPORTANT: when calculating the dimensions of a system with multiple
Syncro³ actuators, it is advisable to consider the force of each
90% of that stated on the plate.
6. ID PLATE AND MARKING DATA
The actuators have
marking and comply with the Standards listed in the Declaration of
Conformity. They also come with a Declaration of Incorporation, due
by the Machinery Directive as “partly completed machines”. Both declarations are included
in the final pages of this manual.
The plate data is displayed on an adhesive label placed on the outside of the casing, which
must remain intact and visible.
The main information it displays includes: manufacturer's address, product name
number, technical characteristics, production date and serial number
7
USE OF ACTUATOR IN SYNCRO³ VERSION
version the actuator has been equipped with the new system patented by
NEKOS for coordinated synchronisation of a group of actuators (up to eight at the same
time). Electronic control of speed is completely automatic device inside the actuator and
t require any external control station: just connect the feeder cable communication
diagram on page 15)
and carry out
R
ESET
procedure.
Three elements differentiate the SYNCRO
3
version of the actuator:
The technical data label with the “..…
SYNCRO
3
” label.
The SYNCRO label to one side of the technical data label on the
In the 230V ~ version, the power cord has 4 wires
(3 power +1 signal
Use of a Syncro³-version actuator
The Syncro³ version of the actuator is used when the window is particularly heavy or wide
(more than approximately 1,2 m wide)
and a single actuator doesn't allow complete closure
of the window, especially in the corners, therefore making it necessary to h
When a group of Syncro³ actuators is used, the movement of the window sashes occurs in
a synchronized manner, i.e., uniformly without interruptions and/or variations in the speeds
of the actuators. If one of the actuators stops, due to mechanical obstruction or an
electronic problem, the other actuators stop as well, thereby guaranteeing the integrity of
Recall that the force exerted by a group of actuators installed on the same
window sash is equivalent to the sum of the forces exerted by each actuator; so
assembling two actuators doubles the force exerted on the window.
IMPORTANT: when calculating the dimensions of a system with multiple
Syncro³ actuators, it is advisable to consider the force of each
90% of that stated on the plate.
ID PLATE AND MARKING DATA
marking and comply with the Standards listed in the Declaration of
Conformity. They also come with a Declaration of Incorporation, due
by the Machinery Directive as “partly completed machines”. Both declarations are included
in the final pages of this manual.
The plate data is displayed on an adhesive label placed on the outside of the casing, which
act and visible.
The main information it displays includes: manufacturer's address, product name
number, technical characteristics, production date and serial number
version the actuator has been equipped with the new system patented by
NEKOS for coordinated synchronisation of a group of actuators (up to eight at the same
time). Electronic control of speed is completely automatic device inside the actuator and
t require any external control station: just connect the feeder cable communication
procedure.
The SYNCRO label to one side of the technical data label on the
(3 power +1 signal).
The Syncro³ version of the actuator is used when the window is particularly heavy or wide
and a single actuator doesn't allow complete closure
of the window, especially in the corners, therefore making it necessary to have two or more
When a group of Syncro³ actuators is used, the movement of the window sashes occurs in
a synchronized manner, i.e., uniformly without interruptions and/or variations in the speeds
stops, due to mechanical obstruction or an
electronic problem, the other actuators stop as well, thereby guaranteeing the integrity of
Recall that the force exerted by a group of actuators installed on the same
sum of the forces exerted by each actuator; so
IMPORTANT: when calculating the dimensions of a system with multiple
Syncro³ actuators, it is advisable to consider the force of each actuator as
marking and comply with the Standards listed in the Declaration of
Conformity. They also come with a Declaration of Incorporation, due to their classification
by the Machinery Directive as “partly completed machines”. Both declarations are included
The plate data is displayed on an adhesive label placed on the outside of the casing, which
The main information it displays includes: manufacturer's address, product name - model
number, technical characteristics, production date and serial number.
8
In the event of a complaint, please indicate the serial number (SN) displayed on the label.
An explanation of the symbols used on the label to abbreviate the technical characteristics
is given in the table in the chapter on “TECHNICAL DATA”.
7. TECHNICAL DATA
Model SKYRO 850
230V
24V
SOLO
SYNCRO³ SYNCRO³
RWA
Thrust and traction force (F
N
)
850 N
Course lengths (S
V
)
350, 550, 750, 1000 mm
Input voltage (U
N
)
110-230V~ 50/60 Hz
24V
Current absorption at nominal load
(I
N
)
0,37A (110V) - 0,18A
(230V)
1,0 A
2,0 A
Power absorption at nominal load
(P
N
)
28W (110V) - 24W
(230V)
24 W
48 W
No load speed
(Open / Close)
5 mm/s
7 mm/s
↑ 10 mm/s
↓ 7 mm/s
Duration of no load stroke
In relation to the stroke
Stroke 550
< 60 s
Electrical insulation
Class II
Class III (Selv)
Type of service (D
R
)
2 cycles
5 cycles
Operating temperature
(- 20°C) (+ 70 ºC)
Protection index for electrical devices
IP65
Soft-stop function
Yes
Relax function
Yes
Adjustment of connection to window
frame
Position self-determining
Parallel powering of two or more motors
Yes (max 20)
Synchronised function
No
Yes - max
4
Yes max 8
Holding nominal force
3000 N
Stroke-end at opening
Electronic with encoder
(once the end position is
acquired)
Stroke-end at closing
At absorption of power
Protection against overload
At absorption of power
Noise level
55 dB(A)
Type and length of power cable
H05VV-F - 2m
S-FG4GA/2 - 2m
Dimensions
44,6x113x( 163) mm
Weight
2,0 / 2,34 / 2,69 / 3,11
Kg
1,95 / 2,29 / 2,64 / 3,07
Kg
Information presented in these illustrations is not binding and is also subject to variation without prior notice
