19
6
Wiring error:
The power supply cables of the
devices configured in Syncro³ are
inverted.
Check and correct the wiring.
7
Encoder error:
The internal encoder had a
counting error.
Repeat the RESET procedure.
8
Electric power supply error:
The power supply voltage is outside
the permitted range or is unstable.
Check the electrical contacts at the ends of the
actuator cable and ensure that the power supply is
correct.
9
Chain alignment error:
The misalignment of the chain
terminal positions on devices
connected in a Syncro configuration
exceeds the maximum amount
allowed.
Repeat the RESET procedure.
10
Memory error:
The internal memory write process
failed.
Repeat the RESET procedure.
11
Connection error:
A RESET procedure is being
started with actuators different than
Syncro³
Check the type of actuators chosen for the system.
Repeat the RESET procedure.
WITH GREEN LED
LED Status
Meaning
STEADY-ON
Device powered correctly.
The device executed a chain re-entry stroke correctly, completing the operation
by writing to the memory.
FLASHING
Device powered correctly. The device executed an outgoing stroke of the chain
correctly. The number of flashes indicates the number previously assigned to
the device during the RESET procedure.
WITH ORANGE LED
LED Status
Meaning
STEADY-ON
Duration < 0.5 sec.
Internal memory write process in progress.
STEADY-ON
RESET Procedure in progress.
STEADY-ON for 3 sec.
Overlap acquisition procedure finished correctly.
FLASHING
RESET Procedure finished correctly. The number of flashes indicates the
number assigned to the device in a configuration with several devices.
13. CHECKING FOR CORRECT ASSEMBLY
Check that the window is perfectly closed at corners and that there are no obstacles
caused by incorrect positioning during
Check that when the window frame is closed the chain terminal is at least a few
millimetres away from the actuator body. This will ensure the window is properly
closed and seals are correctly compressed. In the event that this should not be the
case there is no guarantee that the window is closed correctly.
Check that hinges and support brackets are aligned to each other and tightly fixed
against the window frame with screws fixed correctly into position.
Check that the window reaches the desired
selected.
14. EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
In the event that the window frame should require manual opening due to power failure or
problem with the mechanism or for normal maintenance or external cleaning
window frame, the NEKOS patent allows rapid unhooking of the chain. To perform this
operation, proceed as follows:
1. Unhook the flap of the quick hook locking the chain
terminal to the bracket.
2. Hold the window in one hand and remove the pin of the
chain terminal from the two u channels on the bracket
with the other.
(this operation should be performed with
the window open at least 10 cm to facilitate unhooking of
the chain)
.
3. Manually open the window frame.
A
TTENTION
:
DANGER
in position by the chain
4. After maintenance and/or cleaning repeat points 1 and 2 in reverse order.
15. ENVIRONMENTAL PROTECTION
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials: aluminium, zinc, iron, plastic of
various type, cuprum.
16. CERTIFICATE OF GUARANTEE
The manufacturer will guarantee good function of the appliance. The manufacturer shall
undertake to replace defective parts due to poo
defects in accordance with article 1490 of the Civil Code. The guarantee covers products
and individual parts for
2 years
the purchaser possesses proof of purcha
payment.
20
CHECKING FOR CORRECT ASSEMBLY
Check that the window is perfectly closed at corners and that there are no obstacles
caused by incorrect positioning during assembly.
Check that when the window frame is closed the chain terminal is at least a few
millimetres away from the actuator body. This will ensure the window is properly
closed and seals are correctly compressed. In the event that this should not be the
ase there is no guarantee that the window is closed correctly.
Check that hinges and support brackets are aligned to each other and tightly fixed
against the window frame with screws fixed correctly into position.
Check that the window reaches the desired position according to the stroke
EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
In the event that the window frame should require manual opening due to power failure or
problem with the mechanism or for normal maintenance or external cleaning
window frame, the NEKOS patent allows rapid unhooking of the chain. To perform this
operation, proceed as follows:
Unhook the flap of the quick hook locking the chain
Hold the window in one hand and remove the pin of the
chain terminal from the two u channels on the bracket
(this operation should be performed with
the window open at least 10 cm to facilitate unhooking of
dow frame.
DANGER
– the window could fall as the sash is no longer held
in position by the chain
.
After maintenance and/or cleaning repeat points 1 and 2 in reverse order.
ENVIRONMENTAL PROTECTION
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
inly made from the following materials: aluminium, zinc, iron, plastic of
CERTIFICATE OF GUARANTEE
The manufacturer will guarantee good function of the appliance. The manufacturer shall
undertake to replace defective parts due to poor quality materials or manufacturing
defects in accordance with article 1490 of the Civil Code. The guarantee covers products
2 years
from the date of purchase. The latter is valid as long as
the purchaser possesses proof of purchase and completion of all agreed conditions of
Check that the window is perfectly closed at corners and that there are no obstacles
Check that when the window frame is closed the chain terminal is at least a few
millimetres away from the actuator body. This will ensure the window is properly
closed and seals are correctly compressed. In the event that this should not be the
Check that hinges and support brackets are aligned to each other and tightly fixed
against the window frame with screws fixed correctly into position.
position according to the stroke-end
EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
In the event that the window frame should require manual opening due to power failure or
problem with the mechanism or for normal maintenance or external cleaning of the
window frame, the NEKOS patent allows rapid unhooking of the chain. To perform this
the window could fall as the sash is no longer held
After maintenance and/or cleaning repeat points 1 and 2 in reverse order.
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
inly made from the following materials: aluminium, zinc, iron, plastic of
The manufacturer will guarantee good function of the appliance. The manufacturer shall
r quality materials or manufacturing
defects in accordance with article 1490 of the Civil Code. The guarantee covers products
from the date of purchase. The latter is valid as long as
se and completion of all agreed conditions of
