Neilsen CT5511, Оригинальное руководство пользователя

Страница: 8 / 12

Lowering
1. Switch the lift mechanism onto lowering.
2. Move the level completely from top position to bottom position. The load will
be lowered.
3. Insert the safety bolts in the next hole below.
4. Repeat step 2 and 3 until the desired lower.
Operating with more lifts
Operating with 2 lifts (Lifting an axle) or 4 lifts (Lifting a complete vehicle) we
suggest the 2 or 4 persons move the lifts in same time.
If you are working alone proceed as follow.
1. Position 2 wheel lifts on 2 opposite wheels or 4 wheel lifts on all 4 wheels.
2. In case of lifting and lowering with 2 wheel lifts press the level maximum 2
times and change to opposite wheel lift after safety bolts inserted.
3. In case of lifting and lowering with 4 wheel lifts press the level maximum 1
time and change to next wheel lift in the order after safety bolts inserted.
4. Repeat the procedures in the same order.
5. Never enter the area under the vehicle without sufficient and stable support.
7. MAINTENANCE
IMPORTANT: Both the maintenance and repair of the lift may only be performed
by qualified persons, who have sufficient knowledge of the systems used in
these devices as a result of their training and experience.
2. Keep the lift clean and lubricate all moving parts at regular intervals, which
must be clean and protected from aggressive conditions at all times.
3. Only original spare parts should be used.
4. Prior to each use, check for bent, broken, cracked or loose parts. Do not use if
any defects are present. If it is suspected that the lift has been subjected to
abnormal loads or has suffered any knocks, withdraw it from service until the
problem has been rectified.
5. Following a period of prolonged intensive use, it is recommendable to change
the oil in order to extend the useful life of the lift.
6. Keep the lift in a clean, dry place and out of children reach.