Neilsen CT2818, Оригинальная инструкция, Страница: 9 / 13

11. FLEXYDRIVE ASSEMBLY
Remove the front ring nut from the tool by turning in an anti-clockwise
direction. Partially unscrew the blocking ring nut from the spindle . Partially
extract the internal transmission cable from the flexydrive. Insert the flexydrive
transmission cable into the spindle of the tool pushing it in as far as possible.
Keep the spindle block button pressed in and screw the spindle blocking ring
nut turning it in a clockwise direction. Tighten using the spanner for this
purpose. Screw the threaded end of the flexydrive onto the body of the tool
and tighten, screwing in a clockwise direction
12. TECHNICAL DATA
Voltage / frequency 230V/50Hz
Power input 135W
No load speed 10000-32000/min
Collet size 3,2mm
Protection class II
13. CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull
the power plug.
8.1 Cleaning

Keep the ventilation slots of the machine clean to prevent overheating
of the

Regularly clean the machine housing with a soft cloth, preferably after
each

Keep the ventilation slots free from dust and dirt.

If the dirt does not come off use a soft cloth moistened with soapy
water.
Never use solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.