Neilsen CT2818, Оригинальная инструкция, Страница: 3 / 13

1. APPLICATION
This rotary tool can be used for drilling, grinding, sanding and polishing, as
well as engraving, cutting and removing rust in tight spaces or inaccessible
places. The tool can be used on most metals, glass, wood and ceramics. For
best performance and results keep the speed as even as possible without
exercising too much pressure. As a guideline, use the tool at low speed for all
large accessories, such as polishing for example, and at high speed for
smaller accessories such as those used for engraving. For grinding and
engraving, hold the tool as if it were a pen.
WARNING! For your own safety, read this manual and the general
safety instructions carefully before using the appliance. Your power
tool should only be given to other users together with these
instructions.
2. DESCRIPTION (FIG A)
1. ON/OFF switch
2. Speed adjusting wheel
3. Carbon brush holder
4. Spindle lock button
5. Collar
6. Collet nut
FIG.A