NEFF T29R96N0AU, Инструкция пользователя

Страница: 14 / 21

The control knob is used to adjust the flame of the gas
burner.
“Low flame” graphic= lowest output
“High flame” graphic= higest output
Burner
Position
Graphic
13
All hotplates have an on and a residual heat display that
lights up when the flame on the corresponding hotplate
is lit.
All hotplates have an automatic ignition system that is
triggered if the flame goes out on the hotplates in use.
This system will attempt to relight the hotplate for
10 sec.
If, after this time, the hotplate is not lit, the on display
will flash and the burner will remain locked.
To unlock it, turn the switch to position .
residual heat indicator will remain on indicating that
the temperature is too high here. Do not touch the
cooking zone while the pilot light is on.
Once the cooking zone has been disconnected, the
After a while the residual heat indicator will switch off
indicating that the temperature in the cooking zone
has lowered and is not too high now. Be careful
though when touching the appliance in order to
avoid burns, as the cooking zone may have not
cooled completely.
On and residual
heat display
Automatic ignition
system
14