NEFF T29R96N0AU, Инструкция пользователя

Страница: 13 / 21

Burner ignition &
control
Burner locations
1. Medium burner 3. Wok burner
Operating instructions
12
1
3
3
2
1
2
4
2.
Small burner 4
. Control Knobs
There are indications to show which burner each control
knob operates. Refer Fig. 13.
To light a burner , press the burner switch and turn it
The corresponding on display for the burner will light up.
switch to the position and repeat the operation.
left to the maximum position, keeping it in this
If the ignition sparkers are dirty, this makes the burner
position for a few seconds until the burner lights before
possible. Do this with a small brush and make sure
releasing and adjusting it to the required position.
If the burners on your cooking hob are fitted with
safety valves
(which stop the flow of gas if one of the
If it does not light, the on display will flash. Turn the
same way, though you should continue to hold in the
that the ignition sparker is not hit or knocked violently.
harder to light, so you should keep them as clean as
lights. The corresponding on display for the burner will
light up.
control knob for a few seconds after the flame
To turn it off , turn the control to the right to the position .
briefly and then will stay on, indicating high
If it does not light, the on display will flash. Turn the
temperatures in the cooking zone.
switch to the position and repeat the operation.
the hotplate, the automatic ignition system will be
The display corresponding to the hotplate will flash
triggered.
With the modern and functional cooking hob you have
purchased, you can have progressive taps fitted
In the event of accidentally turning the flame out on
with allow you to adjust the flame to the desired heat.
burners accidentally goes out), light the burners in the
13