NEFF T29R96N0AU, Инструкция пользователя

Страница: 12 / 21

5 To adjust the minimum flame for N.G. replace the
control knob onto the spindle, light the gas and turn
the control knob to the small flame position. Screw
the adjustment screw anti-clockwise to estabilish a
minimum stable flame position. The flame should
remain alight and not burn back to the injector when
the valve is turned quickcly from ‘Full On’ to the
“Minimum flame” position and back a few times.
6
9
10
2 Remove the control knob from the valve spindle.
3
Minimum flame adjustment.
R
. Refer Fig.
9
section of the valve.
Remove the anti-spillage disc seals. If your cooking
hob is fitted with exterior plastic disc seals, remove
1
them by inserting a screwdriver through the disc's
When you have removed the disc seals from the
an interior seal made of flexible rubber; you only
central orifice and levering them out. Refer Fig. 10.
need to press this with the tip of a screwdriver to
Turn the control knob to minimum.
Do not remove the interior disk seal.
orifice the control shaft emerges from, you will find
clear the path to the tap adjusting screw. Refer Fig.11.
4 The adjustment screw is positioned at the rear lower
screw must be fully tightened down clockwise.
11
eplace the seals in reverse order and refit the control
knob. Never dismount the valve shaft: in the event of
damage, change the entire valve.
12
To adjust the minimum flame position for LPG the