19
Ignition
The knob for the relevant burner is first pushed
down and turned anti-clockwise to "large flame".
Press the knob down firmly and hold for approx. 3
seconds - only then will the gas be released from the
burner and safely ignited by the sparks. When the
burner is ignited release the knob.
Note:
if it does not light immediately:
1. check gas supply and burner position.
2. try again while holding for up to 10 seconds.
If for any reason the burner flames are extinguished,
switch off the control knob and wait at least 1 minute
before making a new ignition attempt.
If the burner still doesn’t ignite call the after sales
service.
Switching the
Burners to the
"Off Position"
The burners are turned off by means of switching
the control knob to its initial position.
Note
The use of a gas cooker leads to the production of
heat and moisture in the kitchen. For this reason,
make sure that the room is properly ventilated: Keep
natural ventilation openings open or provide a
mechanical ventilating device (e. g. an exhauster
hood).
Long and intensive use of the appliance may
necessitate additional ventilation, e. g. opening of a
window, or a more effective type of ventilation, such
as a mechanical appliance operating on a higher
power stage.
Содержание T28V56N0
Страница 1: ...1 Operating installation and caring instructions T28V56N0...
Страница 7: ...7 Dimensions in mm...
Страница 10: ...10 Picture 3...
Страница 13: ...13...