
6
1. INSTALLATION
Before
installation
These built-in hobs are intended for insertion into a
cut out in the worktop.
The appliance must only be connected by an
authorized gas and electrical fitter to ensure that
statutory regulations and the connection
requirements of the local electricity and gas supply
company are met.
Before installing the unit, remove any protective film.
When the hob is built in over a cabinet with drawers,
the upper drawer has to be replaced with a cabinet
front. No installation directly over a drawer!
Do not install refrigerators, dishwashers, ovens
and/or cookers or any laundry appliances
underneath the hob.
Be sure to keep minimum distances of 100 mm from
the side wall and 50 mm from the back wall. The
minimum width of the worktop should be 600 mm.
The installation dimensions can be seen on the
following page.
Содержание T28V56N0
Страница 1: ...1 Operating installation and caring instructions T28V56N0...
Страница 7: ...7 Dimensions in mm...
Страница 10: ...10 Picture 3...
Страница 13: ...13...