8
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the
Û
position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off.
1.
Press and hold the
±
info button for 3 seconds to go to the
basic settings menu.
The text display shows "Select language: German". If the
appliance controls are locked, you must unlock them first.
2.
Press the
±
info button repeatedly until the current basic
setting for the relevant submenu is displayed on the text
display (e.g. "Audible signal off").
3.
Using the temperature selector, set the required basic setting
within a submenu (e.g. "Audible signal 2 minutes").
4.
Press and hold the
±
info button for 3 seconds.
Your basic setting is saved.
You can change the following basic settings:
Automatic safety cut-out
The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
You can adjust the period of time after which your appliance
shuts off.
"Safety cut-out" appears in the text display and
‹‹‹
flashes in
the temperature display. Appliance operation is interrupted.
Turn the operating mode selector to the
Û
position to
deactivate it.
Switching the hob on and off
Your hob comes with its own instructions for use. This contains
important safety information, detailed set-up instructions and a
lot of information on care and cleaning.
Hotplate knobs
You can use the four hotplate knobs to set the heat output of
the individual hotplates.
Temperature
display
Text display
Meaning
•
Residual heat
high
Residual heat high
(above 120 °C)
œ
Residual heat
low
Residual heat low
(between 60 °C and 120 °C)
$
%
Basic settings menu
Submenu
Basic setting
Setting
symbol
Language
Select language
English
Childproof lock
Appliance controls
unlocked
™‚‹
Appliance controls locked
™‚‚
Appliance permanently
locked
™ƒ‚
Audible signal
Audible signal off
™‚‹
Audible signal 30 seconds
™„‚
Audible signal 2 minutes
™„ƒ
Audible signal 10 minutes
™„„
Setting
Meaning
ý
Off position
The hotplate is turned off
Heat settings 1
9
The heat output of the hotplate.
1 = lowest output
9 = highest output
The intermediate settings between
heat setting 2 and 5 are indicated with
a •dot.
ö
Zone activation
Activates the large dual-circuit hot-
plate or the extended cooking zone
(not available on all hotplates).
