28
Replacing the oven light bulb
Replace faulty oven light bulbs.
You can obtain replacement light bulbs from customer service
or specialist retailers: E14, 220 - 240 V, 40 W, heat resistant to
300 °C. Only use these oven light bulbs.
ã=
Risk of electric shock !
Disconnect the appliance from the power supply. Switch off the
circuit breaker or remove the fuse from the household fuse box.
1.
Place a tea towel in the cold cooking compartment to prevent
damage.
2.
Turn the glass cover anticlockwise and remove it.
3.
Replace the oven light bulb with a bulb of the same type.
4.
Screw on the glass cover again.
5.
Remove the tea towel and switch on the circuit breaker.
Note:
If the glass cover cannot be unscrewed: use rubber
gloves to turn it. You can order a special removal tool through
the after-sales service (order no. 613634)
‹
:
‹‹
flashes on the clock display, "rrr"
appears on the temperature display
The power supply was interrupted while
the appliance was in operation
Press the
KJ
clock function button, reset
the clock (see section: Electronic clock)
"E011" appears in the clock display.
Permanent assignment of a button
Cancel the permanent assignment of the
button and press the
KJ
clock function
button
"EXXX" appears in the clock display,
e.g. E300
Internal fault in the appliance electronics
Press the
KJ
clock function button. If the
message does not go out, pull out the
mains plug and plug it back in again after
approx. 10 seconds
It is not possible to operate the appliance,
"Appliance locked" appears on the text
display,
D
and -
†
- appear on the temper-
ature display.
The appliance has been locked
Deactivate the lock
(see section: Childproof lock)
It is not possible to operate the appliance,
"Appliance permanently locked" appears
on the text display,
D
and
†˜
appear on
the temperature display.
The appliance controls are locked perma-
nently
Deactivate the permanent lock
(see section: Childproof lock)
The appliance does not heat up, the two
dots flash on the clock display
‚‡‹©
appears in the temperature display, for
example
A button combination was actuated
Switch off the appliance, press and hold
the
±
info button for 3 seconds, then press
and hold the
KJ
clock function button for
4 seconds, then press and hold the
±
info
button for 3 seconds
Electronically controlled functions are mal-
functioning
Energy surges (e.g. lightning strike)
Reset the function concerned
Once you have switched on an operating
mode,
•
or
œ
appears on the temperature
display, and "Not possible" appears on the
text display
The appliance has not cooled down fully
Wait until the appliance has cooled down,
then switch on the operating mode again
The appliance has switched off automati-
cally. "Safety switch-off" appears in the text
display,
‹
:
‹‹
flashes in the temperature
display
The appliance has switched off to protect
itself from overheating
Turn the operating mode selector back to
the
Û
position
Smoke is generated during roasting or
grilling
Fat is burning on the grill element
Continue grilling or roasting until the fat on
the grill element is burnt away
Wire rack or universal pan inserted incor-
rectly
Place the wire rack in the universal pan
and insert them together at a lower shelf
height
Higher levels of condensation are gener-
ated in the cooking compartment
Normal occurrence (e.g. when baking
cakes with very moist toppings or roasting
a large joint)
Open the appliance door briefly from time
to time during operation
Enamelled accessories have light, matt
marks
Normal occurrence caused by dripping
meat or fruit juices
Not possible
Door panels are misted up
Normal occurrence caused by tempera-
ture differences
Heat the appliance up to 100 °C and then
switch off again after 5 minutes
Problem
Possible cause
Remedial action
