26
3.
Close the appliance door until resistance becomes
noticeable (figure A)
4.
With both hands, grip the door on the left and right-hand side,
close the door a little more and pull it out (figure B).
Fitting the appliance door
1.
Insert the hinges in the left and right-hand holders (figure C).
The notch on both hinges must engage.
2.
Open the appliance door fully.
3.
Close the locking levers on the left and right-hand side fully
(figure D).
The appliance door is secured and can no longer be
removed.
4.
Close the appliance door.
Cleaning the door panels
To facilitate cleaning, you can remove the door panels from the
appliance door.
ã=
Risk of injury!
The components inside the appliance door may have sharp
edges. Take care not to cut yourself. Wear protective gloves.
ã=
Risk of injury!
The appliance must not be used again until the door panels
and appliance door have been correctly fitted.
Removing the door panel
1.
Unhook the appliance door and lay it on a soft, clean surface
with the front side facing downwards (see section:Removing
and installing the appliance door).
2.
Grip the door panel next to the hinges and pull it out of the
plug-in holders (not visible).
3.
Lift the door panel slightly and remove it in the direction of the
hinges.
Removing the intermediate panel
Before removing, make a note of the position in which the
intermediate panel is fitted, so that you do not refit it the wrong
way round later.
1.
Press the left and right-hand holders outwards.
The intermediate panel disengages upwards.
2.
Lift the intermediate panel slightly (e.g. with a spatula) and
remove it.
Cleaning
Clean the door panels with glass cleaner and a soft cloth.
Caution!
Do not use any sharp or abrasive medium or a glass scraper.
The glass could be damaged.
Fitting the intermediate panel
1.
Insert the intermediate panel on the left and right into the
supports.
2.
Push the intermediate panel downwards in the retainers.
Fitting the door panel
1.
Insert the door panel on the left and right into the supports.
2.
Press the door panel downwards into the plug-in holders.
3.
Refit the appliance door.
$
%
&
'
