NEFF C28MT27H0B, Руководство пользователя и инструкции по установке

Страница: 17 / 48

Microwave
en
17
3.
Swipe left or right to configure the settings for the
"microwave" ​⁠.
4.
Press the bottom row to select the microwave
power setting.
a
A microwave power setting and a cooking time ap-
pear.
5.
To select a microwave power setting, press the mi-
crowave power setting.
6.
Press the bottom row to select the cooking time.
7. Swipe left or right to select a cooking time.
8.
Use ​⁠ to start the microwave.
a The microwave starts and the cooking time counts
down. The heat-up bar pulses.
a Once the cooking time has elapsed, an audible sig-
nal sounds and the appliance stops heating.
9. Press any button to end the signal tone.
‒
If necessary, set the microwave power setting
and cooking time again.
‒
When the food is ready, use ​⁠ to switch the ap-
pliance off.
10.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
→
"Drying the cooking compartment with the Dry
function", Page 17
Note:
If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you must press ​⁠ to continue the operation. If
you have changed the basic setting for this, make sure
that the microwave does not resume operation without
food inside.
→
"Basic settings", Page 22
Changing the microwave power setting
If you change the microwave power setting, the cook-
ing time is reset.
1.
Press ​⁠ to pause operation.
2.
Press the required microwave power setting.
3.
Press the bottom row to select the cooking time.
4.
Swipe left or right to select a cooking time.
5.
Use ​⁠ to start the microwave.
Changing the cooking time
1.
Press ​⁠.
2. Swipe left or right to change the cooking time.
a
The setting is applied.
Drying the cooking compartment with the Dry
function
The "Dry" function heats up the cooking compartment
so that the moisture in the cooking compartment evap-
orates. You will then need to open the appliance door
to allow the steam to escape.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶
Allow the appliance to cool down before cleaning.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
Requirement:
The cooking compartment must have
cooled down.
1.
Remove any food remnants from the cooking com-
partment.
2.
Dry the cooking compartment with a sponge.
3.
Press ​⁠ to switch the appliance on.
4.
Press ​⁠.
5.
Swipe left or right to select "Dry" ​⁠.
6.
Press the bottom row.
a The duration will appear on the display. The duration
cannot be changed.
7. Press the bottom row.
8.
Press ​⁠ to start drying the appliance.
a Once the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
9. Press ​⁠ to switch the appliance off.
10.
Remove limescale marks with a cloth soaked in vin-
egar, then wipe with clean water and dry with a soft
cloth.
11. Leave the appliance door open for 1-2 minutes so
that the cooking compartment dries completely.
9.3 Microwave combination
To reduce the cooking time, you can use certain types
of heating in combination with the microwave.
Possible types of heating include:
¡
Hot air ​⁠
¡
Top/bottom heating ​⁠
¡
Circo-roasting ​⁠
¡
Grill, large area ​⁠
¡
Grill, small area ​⁠
Possible microwave power settings include:
¡
90 watts
¡
180 watts
¡
360 watts
Setting the microwave combination
Note:
Note the correct way to operate the microwave:
¡
→ "Safety", Page 2
¡
→ "Preventing material damage", Page 6
¡
→ "Microwave power settings", Page 11
¡
→ "Cookware and accessories with microwave",
Page 15
1.
Use ​⁠ to switch the appliance on.
2.
Press ​⁠.
3.
Swipe left or right to set the "microwave
combination" ​⁠.
4.
Press "Next".
5.
To select the type of heating, press "Type of heat-
ing".
6.
Swipe left or right to select a type of heating.
7.
To select a temperature, press "Temperature".
8.
Swipe left or right to select a temperature.
9.
To select the microwave power setting, press "Mi-
crowave power setting".
10.
Swipe left or right to select a microwave power set-
ting.
11.
To select the cooking time, press "Cooking time".
12.
Swipe left or right to select a cooking time.
13.
Press ​⁠ to save the settings.
14.
Use ​⁠ to start the microwave combination.
a
The microwave combination starts and the cooking
time counts down. The heat-up bar lights up.