NEFF B27CR22N1, Руководство пользователя и инструкции по установке

Страница: 23 / 36

Troubleshooting
en
23
9.
Put the door cover in position and push down on it
until you hear it click into place.
10.
Close the appliance door.
Note:
Do not use the cooking compartment again until
the door panes have been correctly fitted.
17 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
17.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working. The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
"Language English"
appears on the dis-
play. There has been a power cut.
▶
Configure the initial configuration settings.
→
"Initial use", Page 10
"-H-" or "-h-" appears
on the display. Cooking compartment too hot for operating mode.
1. Wait until the appliance has cooled down.
2.
Start the operating mode again.
The appliance cannot
be switched on;
appears on the dis-
play. Automatic childproof lock or childproof lock is activated
▶
Press and hold the button until "Childproof lock deactivated" appears on the display.
Appliance will not
start or cuts out dur-
ing operation. Different causes are possible.
▶
Check any notifications that appear on the display.
→
"Displaying information", Page 11
Malfunction
▶
Call the after-sales service.
→
"Customer Service", Page 25
The appliance is not
heating;
appears
on the display.
Demo mode is activated in the basic settings.
1.
Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and then on again.
2.
Deactivate Demo mode within the next 3 minutes in the
→
"Basic settings", Page 15 .