nedis PEBL150CGY, Быстрый старт

Страница: 1 / 17

a
Quick start guide
Electric Overblanket
PEBL150CGY
For more information see the extended manual online: ned.is/PEBL150CGY
Intended use
The product is exclusively intended as an electric overblanket for indoor use. Any modification
of the product may have consequences for safety, warranty and proper functioning.
Parts list
[Image A]
1 Plug 8 Temperature icon
2 Locking tab 9 Time icon
3 Power socket q Time indicator
4 Temperature button w Temperature indicator
5 Time button e Power switch
6 High button r Controller PS7G-H/L
7 Blanket
Safety instructions
-
WARNING
•
Only use the product as described in this manual.
• Ensure before use you know how the product works and how to operate it.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective
device immediately.
•
This product may only be serviced by a qualified technician for maintenance to reduce
the risk of electric shock.
• Disconnect the product from the electrical outlet and other equipment if problems occur.
•
Do not drop the product and avoid bumping.
•
Used only as overblanket.
• Always use the voltage (A.C. Only) marked on the rating label.
• Use only the type of controller marked on rating label.
• Always switch off the controller before you insert or remove a plug.
•
Do not expose the product to water or moisture.
• The product is not intended for medical use in hospitals.
• Do not use together with another heating appliance.
• When in use ensure the blanket and mains cord do not get trapped.
•
Children should be supervised to ensure that they do not play with the product.
• Cleaning and user maintenance shall not be done by children without supervision.
• The product must not be used by persons insensitive to heat and other very vulnerable
persons who are unable to react to overheating.
•
Children under the age of 3 are not to use the product due to their inability to react to
overheating.
• The product is not to be used by young children over 3 years of age, unless the controls
have been pre-set by a parent or guardian, or unless the child has been adequately
instructed on how to operate the controls safely.
• The product can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the product in a safe
way and understand the hazards involved.
Connecting and removing the controller
[Image B and C]
Connect the controller
[Image B]
1. Lift the locking tab 2 .
2. Push the plug 1 into the power socket 3 .
Remove the controller
[Image C]
-
Make sure the power switch e of the controller r is switched to Off.
1. Lift the locking tab 2 .
2. Pull the plug
1
out of the power socket
3
.
-
Do not pull the cord of the controller r . And do not try to pull the plug 1 out without
lifting the locking tab 2 .
Preheat and use
-
Do not use if it is damp or wet.
4
Preheat 30-60 minutes before using.
1. Connect the controller.
2. Connect the power cord to the mains.
-
Ensure people do not trip over the cord.
3. Switch the power switch e to On.
4. Press the High button 6 to set at ‘H’.
4 After one hour the high temperature automatically will change to ‘L’ (Low temperature).
5. Press the Temperature button 4 to set the temperature. Select L,1-7,H.
6. Press the Time button 5 to select the total operating time. Select 1-9 hour.
-
If you go to sleep or use it for a long time, set at 'L' or 1, to avoid overheating.
After use
1. When the blanket is not in use, switch the power switch e to Off.
2. Remove the plug 1 from the power socket 3 .
3. Disconnect the power cord from the mains.
If you want to store the blanket for a longer period. Repeat step 1 – 3.
4. Let it cool down. Make sure the blanket is dry.
-
Let it dry naturally. Do not iron or dry in the sun.
5. Gently fold the blanket and place back into the packing bag.
6. Store in a cool dry place.
-
Do not place items on top of it.
Cleaning & Maintenance
Cleaning
•
Disconnect the controller from the blanket and from the mains, before cleaning and
when not in use.
• Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when
cleaning the product.
•
Do not immerse the controller in water or get it wet.
•
Do not wring out the blanket.
• Allow the blanket to dry naturally. Do not dry the blanket in the sun, do not use a product
such as a hair dryer to dry it and do not connect it to the mains supply to dry it.
•
Do not use mothproofing agents.
Read the instructions
before use.
Not to be used by very
young children (0-3 years).
Do not iron.
Do not insert pins. Do not bleach. Do not dry clean.
Do not use folded or
rucked.
Do not tumble dry. Maximum washing
temperature 40 °C.
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage
the surface. To clean the blanket, hand wiping it down with a soft damp cloth with very
mild detergent, mildly process at a maximum washing temperature of 40°C. Allow it to dry
thoroughly before using or storing it. When washed, drape it over a clothes line to dry.
•
Do not use clothes pegs to secure it.
Machine washing of the blanket is possible; however, hand wiping it down will prolong the
life of the blanket. To machine wash, remove the controller and place the blanket in a net
bag and seal it. Use a small amount of detergent and set the washing machine to a “Delicate
Wash” with a maximum temperature of 40°C. When washed, remove the blanket from the
net bag and drape it over a clothes line to dry.
• Do not use clothes pegs to secure it.
Maintenance
Do not try to open or repair the controller, cord or the blanket. It must be serviced by a
qualified person.
Examine the blanket frequently to check that there are no signs of wear or damage. If any
damage/wear is spotted, do not use the blanket and search for specialist advice.
Error Code Cause Solution
C
The controller has been placed under or inside the
blanket and it has overheated. As a safety measure,
the electric blanket controller has turned off.
Turn the controller OFF, unplug
the electric blanket, lay it down
completely flat and leave to cool
down.
E The blanket has been used while folded or crumpled
and it has overheated. As a safety measure, the
electric blanket controller has turned off.
P The controller or connector is not connected
properly.
Ensure the controller and/or
connector are connected properly.
Specifications
Product
Electric Overblanket
Article number PEBL150CGY
Dimensions (l x w) 200 x 180 cm
Input voltage 220 - 240 V ~ 50 Hz
Wattage
110 - 120 Watt
Temperature settings range 25 °C - 50 °C ± 5 °C
Material Coral fleece
c
Kurzanleitung
Elektrische Wärmedecke
PEBL150CGY
Für weitere Informationen beachten Sie die erweiterte Anleitung online:
ned.is/PEBL150CGY
Bestimmungsgemäße Verwendung
Das Produkt ist exklusiv zur Verwendung als Wärmedecke innerhalb von Gebäuden gedacht.
Jegliche Modifikation des Produkts kann Folgen für die Sicherheit, Garantie und
ordnungsgemäße Funktionalität haben.
Teileliste
[Abbildung A]
1 Stecker 8 Temperatursymbol
2 Arretierung 9 Zeitsymbol
3 Stromanschluss q Zeitanzeige
4 Temp-Taste w Temperaturanzeige
5 Time-Taste e Ein/Aus-Schalter
6 High-Taste r Steuerung PS7G-H/L
7 Decke
Sicherheitshinweise
-
WARNUNG
• Verwenden Sie das Produkt nur wie in dieser Anleitung beschrieben.
• Stellen Sie vor Benutzung sicher, dass Sie wissen, wie das Produkt funktioniert und wie es
bedient wird.
•
Verwenden Sie das Produkt nicht, wenn ein Teil beschädigt ist oder es einen Mangel