nedis DTCTCO40WT, Руководство пользователя

Страница: 12 / 124

12
4
Always notify the manufacturer if a problem with an
appliance is identified.
4
The product only measures CO in the area where it
is located.
4
Individuals with medical conditions that may make
them more sensitive to CO may consider using
warning devices which provide audible and visual
signals for CO concentrations under 30 ppm. For
additional information on Carbon Monoxide and
your medical condition contact your physician.
Hush mode
In hush mode, the product does not detect CO for 12
hours.
The hush mode must be activated manually.
• Press the test/hush button A 3 shortly to activate
hush mode. The alarm indicator blinks every 30
seconds
After 12 hours, the product goes back into standby
mode.
4
Only use the hush mode when the product is in line
of sight.
The product status is indicated through the display
A 4 and LED lights A 1 , A 2 and A 7 . An overview
of the different statuses and indications is shown in the
table below.
Information LED indicator Sound alarm Display
Power up and warm
up mode
Check Installation to
power the product. Warm
up lasts approximately
100 seconds.
A 1 , A 2 and A 7
blink alternately.
One short beep.
Standby mode
After warm up, the
product will activate
standby automatically.
A
2 blinks green
every 30 seconds.
Off None
Hush mode
Press A 3 shortly to enter
hush mode.
A 7 blinks yellow
every 30 seconds.
Off
Silenced alarm
Press
A
3 shortly to
silence an unwanted
alarm.
A
1 blinks red
continuous.
Off
Any number
between 25
- 999.
Test
Press and release
A
3 to
test the product.
A
1 blinks red 4
times.
four beeps.
Low battery
condition
Replace the product
immediately.
A
7
blinks yellow
every 30 seconds.
A beep every 30
seconds.