10
www.nedaplibrix.com
General settings
Device name is an identifier that you can make up. This will allow you
to see which item you are connected to in the LibAssist Manager
application, when there are multiple hand held devices in use.
Manager IP address is required to connect the device and the
Manager application. To look up the computer’s IP address, you can
start command prompt and enter ipconfig command, or check with
your IT support staff. Port number is also required after the colon –
default value is 6666, which is also default in the Manager
application. If you choose to change this, you have to change it to
each device and also the Manager application.
Local data folder is the default folder where item lists will be read
from and written to. If none is given, LibAssist will use a default value
of “\SDMMC\Nedap”.
UI settings
Language allows you to change the user interface language of the
hand held device software.
List font can be used to configure what font is used to display the
items in the device software. Change this as needed, for example
when working with multi-byte character sets (Chinese, Japanese) or
other languages that may have characters which are not supported by
all fonts.
Sound is used to control whether the device plays short sounds when
it requires user attention.
Do not ask loading can be used to skip LibAssist’s startup screen and
go straight to the main menu when starting the application.
