NED NUCLi7370AT6 Скачать руководство пользователя

Страница: 2 / 61

NED

NUCLi7370AT6

UME-0069-03

For Customers in U.S.A.

This equipment has been tested and found to comply with the limits for a Class A

digital device, in accordance with Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his or her own expense.

For Customers in the EU

This equipment has been tested and found to comply with the essential requirements

of the EMC Directive 2004/108/EC, based on the following specifications applied:

EU Harmonised Standards

EN55032:2015 Class A

EN55011:2009+A1:2010 Class A

EN61000-6-2:2005

Warning

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Directive on Waste Electrical and Electronic Equipment (WEEE)

Please return all End of Life NED products to the distributor from whom the product

was purchased for adequate recycling and / or disposal. All costs of returning the

Product to NED are borne by the shipper.

Содержание NUCLi7370AT6






























































Результаты поиска

Содержание NUCLi7370AT6

Отзывы:

Похожие инструкции для NUCLi7370AT6

Бренды по названию

Популярные бренды

NED NUCLi7370AT6, Руководство пользователя

Результаты поиска

Содержание NUCLi7370AT6

Отзывы:

Похожие инструкции для NUCLi7370AT6

Бренды по названию

Популярные бренды