Upper baffle plate
support lug
Upper baffle plate
Lower baffle plate
Lower baffle plate
support lug
Ash plate
The Nectre MK2 LE is supplied with two baffle plates:-
1)
Upper baffle plate – 400(w) x 160(d) x 5(h) mm.
Fit the upper baffle plate first.
With the plate in a horizontal position, slide it up and
over the shorter of the two sets of support hooks
welded to the top of the firebox.
Slide the plate back so that it rests on the upper
support rod on rear wall of the firebox.
The upper baffle plate should be in a horizontal
orientation.
2)
Lower baffle plate – 490(w) x 245(d) x 6(h) mm
Slide the lower baffle plate up and over the lower set
of support hooks welded to the top of the firebox.
Slide the plate back so that it rests on the lower
support rod on the rear wall of the firebox.
Unlike the upper baffle plate, the lower baffle plate
rests on a slight angle sloping down and back to the
rear of the firebox.
The ash plate acts to protect the front of the firebox below
the door opening from the hot coal bed and fire.
When positioning the ash plate, ensure that the front top
edge is flush against the inside edge of the firebox beneath
the door opening.
6. INSTALLING BAFFLE PLATES
7. INSTALLING ASH PLATE