background image

Important safety instructions

When using an electrical appliance, basic safety should always be followed, 

including the following:

Read all instructions before using this sewing machine.

DANGER

 - To reduce the risk of electric shock:

1.   An appliance should never be left unattended when plugged in.
2.   Always unplug this appliance from the electric outlet immediately after using 

and before cleaning.

WARNING

 - To reduce the risk of burns, fire, electric shock, 

or injury to persons:

1.   Read the instruction carefully before you use the machine
2.   Keep the instructions at a suitable place close to the machine and hand it 

over if you give the machine to a third party.

3.   Use the machine only in dry locations.
4.   Never leave the machine unattended with children or elderly people due to 

they may not be able to estimate the risk. 

5.   This appliance can be used by children aged from 8 years and above and 

persons with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge if they have been given supervision or instruction 

concerning use of the appliance in a safe way and understand the hazards 

involved.

6.   Children shall not play with the appliance.
7.   Cleaning and user maintenance shall not be made by children without 

supervision.

8.   Always switch off the machine if you carry out preparation for work (change 

the needle, feed the yarn through the machine, change the footer, etc.).

9.   Always unplug the machine if you leave it unattended, to avoid injury by 

expediently switch on the machine.

10. Always unplug the machine if you changing the lamp or carry out 

maintenance (oiling, cleaning).

11. Don't use the machine if it’s wet or in humid environment.
12. Never pull at the cord, always unplug the machine by gripping the plug.
13. If the LED lamp is damaged or broken, it must be replaced by the 

manufacturer or its service agent or a similarly qualified person, in order to 

avoid a hazard.

III

Содержание K408A





























































Отзывы: