NEC XL-6500 Скачать руководство пользователя

Страница: 7 / 82

123456

INTRODUCTION

This section introduces you to your new MultiSync Hivid 6500 Projector, provides a list of materials that

comes with your projector and describes the features and controls.

Congratulations On Your Purchase Of The MultiSync Hivid 6500 Projector

The MultiSync Hivid 6500 is one of the very best projectors available today. Digital Light Processing

(DLP

) by Texas Instruments enables you to project high bright precise images up to 500 inches across

(measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, document camera,

laser disc player, DVD player and even an HD VCR or HD laser disc player.

You can use the projector on a tabletop or cart, you can permanently mount it on a ceiling*, or you can use

MultiSync Hivid 6500 Projector to project images from behind the screen. The wired remote control can be

used with a cable, and you can even use the wireless remote control.

Features you’ll enjoy :

• A high-performance 1.6 KW Xenon lamp that delivers 6500 lumens (ANSI) and lamp life is 1500 hours.

• DLP offers true color reproduction.

• Display size can be altered to accommodate any picture size from 80 to 500 inches (measured diagonally).

• White Uniformity circuit keeps color of a large image evenly

• DLP projects images with uniform brightness onto screens while colors remain true to their original source.

• Magnifying, Reducing and Panorama mode allows you to make an image large or smaller and wider.

• Edge-blending feature provides a clean unbroken image of multiple screens.

• The new bulb type Xenon short arc lamp offers bright images and yet its long life.

• An image can be projected from in front or behind a screen, and the projector can even be installed on the

ceiling*.

• Supports HDTV and DVD signals as well as most IBM VGA, S-VGA, XGA, SXGA(scaling), Macintosh or

any other RGB signals within a horizontal frequency range or 15 to 80 kHz and a vertical frequency range of

30 to 120 Hz. This includes NTSC, PAL, SECAM, and NTSC4.43 standard video signals.

• On-screen monitor out terminal allows you to view on-screen message on your PC when setting up your

system.

• The remote control can be used with or without a cable.

* Installing the MultiSync Hivid 6500 Projector on the ceiling must be done by authorized NEC technicians.

Consult your NEC dealer for more information.

How Do You Get Started?

The fastest way to get started is to take your time and do everything right the first time. Taking a few minutes

now to review the manual may save you hours later on. At the beginning of each section of the manual you’ll

find an overview. If the section doesn’t apply, you can skip it.

What’s In The Box?

Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the

original box and packing materials if you ever need to ship your MultiSync Hivid 6500 Projector.

• NEC MultiSync Hivid 6500 Projector

• Remote Control with Remote Cable (wireless/wired).

• Power Cable

• Ferrite Core

• Two AA Batteries

• User Manual

Содержание XL-6500



















































































Результаты поиска

Содержание XL-6500

Отзывы:

Похожие инструкции для XL-6500

Бренды по названию

Популярные бренды

NEC XL-6500, Руководство пользователя

Результаты поиска

Содержание XL-6500

Отзывы:

Похожие инструкции для XL-6500

Бренды по названию

Популярные бренды