NEC XL-6500, Руководство пользователя

Страница: 64 / 82

64
3.OPERATION
This feature allows you to select two ways to store settings; auto-
matically and manually.
After “Enable” is selected in the Auto Data Store menu, all projector
settings are stored in the projector's memory automatically. To set
this feature, proceed as follows:
1
Use the CURSOR or button to select the “Auto Data Store”
item on Page 2, then press ENTER to display the “Auto Data
Store” menu.
■
Auto Data Store
- S e t t i n g M o d e -
1 . P J O r i e n t a t i o n
2 . D e f a u l t S o u r c e S e l e c t
3 . S - V i d e o M o d e S e l e c t
4 . V i d e o S y s t e m S e l e c t
5 . A u t o D a t a S t o r e
6 . O p t i o n T e r m i n a l S p e e d
7 . U n i f o r m i t y S w i t c h i n g
S e t t i n g M o d e
P J O r i e n t a t i o n
D e f a u l t M o d e S e l e c t
S - V i d e o M o d e S e l e c t
V i d e o S y s t e m S e l e c t
A u t o D a t a S t o r e
O p t i o n T e r m i n a l S p e e d
[ C e i l i n g / F r o n t ]
[ S 2 ]
[ D i s a b l e ]
[ 3 8 4 0 0 B P S ]
[ D i s a b l e ]
[ D i s a b l e ]
M a n u a l
N T S C 3 . 5 8
D e f a u l t
I N P U T - A
S - V i d e o
U n i f o r m i t y W h i t e
E d g e B l e n d .
2
Use the CURSOR or button to select either “Disable” or
“Enable” and then press ENTER.
Items to select
• Disable .... Projector does not store the settings automatically.
• Enable ..... Projector stores the settings automatically.
Automatic storing data is done when any one of the following
procedures is performed:
• Pressing the END button several times returns the adjustment
screen to the source screen.
• One input is switched to another.
• The projector is turned off.
• Every 10 minutes.
NOTE: After “Disable” is selected in the Auto Data Store menu,
the settings will not be stored in the memory unless you select
“Yes” in the “Store ?” menu.
D i s a b l e
E n a b l e
A u t o D a t a S t o r e