NEC XEN IPK DIGITAL TELEPHONE, Руководство по программированию

Страница: 212 / 638

192 – Chapter 1
DRAFT 3
Printer Connected Selection, 1-5-13
December 2004 NEC Business Solutions Ltd
Doc.
No.: 8194 -
Release 2.0
Dece
mber 2004
1-5-13
System Mode
1
Submode
5
Data No.
13
PC Programming
+ AS
Printer Connected Selection
General Description
Use this Memory Block to program when a printer or PC is connected for SMDR use. If
the printer is disconnected from the system, an alarm sounds at stations connected to Ports
01 and 02.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
No PC Printer
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK1 + LK5 + AC to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
N
to write the data.
5 Press
P
to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-5-02 SMDR Print Format
1-5-14 Printer Line Feed Control Selection
1-5-23 Outgoing Mode Selection
1-5-25 SMDR Valid Call Timer Assignment
1-8-35 COM Port Baud Rate Setting Assignment
1-8-36 COM Port Parity/Stop Bit Setting Assignment
N
1. Station Message Detail Recording (SMDR) cannot be used if this Memory Block is programmed for No.
2. When PC is assigned, the SMDR output data can be saved in a Comma-Separated Values (CSV) format file on a PC.
The file can then be opened using PC software (i.e., MS Excel) to analyze, filter, and/or sort the data.
1 3 : P R I N T E R N O
T I M E D I S P L A Y
Data
No. Title
Setting
Data