NEC Versa P700, Руководство по разборке

Страница: 21 / 29

NEC Versa P700 Disassembly Manual
Page 21
Fig. 39: Disconnecting the CMOS battery
2. Take the battery out of the system and put it aside.
Removing the Plastic Cover
To remove the plastic cover, first remove the keyboard (see Removing the Keyboard ), remove
the LED assy (see Removing the LED Assy ), remove the LCD assembly (see Removing the
LCD Display ), remove the heat sink (see Removing the CPU ), remove the Hard disk drive
cover (see Removing the Hard Disk Drive ), remove the touchpad assembly (see Removing
the Touchpad ), remove the heat plate (see Removing the Heat Plate ), then perform the next
steps:
1. Remove the screw on the bottom of the system at the VersaBay location (see picture
below).
Fig. 40: Removing screw in VersaBay location
2. Remove the screws marked in the next picture
Fig. 41: Removing the plastic cover
(Cone 2.5X3)
A (M2x4)
B (M2.5x5)