Setup and Operation 2-33
Power Management Under AC — Specifies whether to enable power manage-
ment features when AC power is in use. When AC power is connected to your
NEC Versa system, power management is usually disabled. If you enable this pa-
rameter, the system automatically activates the power management profile you
set, even when AC power is used.
Power Savings Level — Lets you choose one of four levels of power manage-
ment.
High Perform provides the greatest system performance with only minimal
power conservation.
Longest Life provides the maximum amount of power savings.
Off disables power management and all device timeouts.
Custom lets you define your own power management configuration by se-
lecting values for specific device timeouts. Custom lets you set the following
timeouts.
Hard Disk Time-out — Allows you to select the amount of time before
your hard disk shuts down.
Video Time-out — Allows you to select the amount of time before your
video shuts down.
Audio Device Time-out — Selects the amount of time before your audio
device shuts down.
Standby Time-out — Allows you to select the system standby timeout pe-
riod.
Auto Suspend Time-out — Defines how much time elapses before the
system automatically enters Suspend Mode.
Suspend Option — Allows you to specify either Suspend or Save to File (STF)
as the default power management mode. In Suspend, after a specified time of
system inactivity, your NEC Versa goes into Suspend or STF, based on the se-
lection. All your data is automatically recovered from where you left off when
you Resume.
Automatic STF — After 30 minutes in Suspend mode the current file is auto-
matically saved to a special file on the hard disk and the system shuts down. To
resume, you must press the power button. The system reads the saved file and
sets up your system accordingly.
If Auto Save to File is set to Off and HDPREPEZ or AMI STF (depending on
model) is present, pressing the
Fn-Suspend
key combination puts the system into
Save to File mode.
Panel Backlight — Lets you select the LCD screen backlight intensity.
