NEC Versa 2500 Series, Руководство пользователя

Страница: 132 / 167

7-4 Solving Problems
POST Error Messages
MESSAGE WHAT TO DO
Diskette drive A
failure or Drive A does not work or is not properly connected.
Drive A is the diskette drive.
No Floppy Drive Check that drive A is securely connected and power
is on.
Press
F2
to start Setup to check the diskette drive
parameters.
If there’s still a problem, the drive might need repair.
General Failure
Reading Drive A
or
Diskette Read Failure –
press
F2
to run Setup.
Press any other key to
retry boot
Remove the diskette from drive A and press
F2
to
start the system from the hard disk.
Or, insert a bootable disk in drive A and press any
other key.
Non-system disk or
disk error; Replace
and press any key
when ready Remove the diskette from drive A or CD from the
CD-ROM reader and press any key to start the
system from the hard disk.
Or, insert a bootable disk in drive A and press any
key.
Operating System Not
Found
or
Fixed Disk Failure 0 Press
F2
to start Setup. Change the hard disk type to
the correct setting. Exit and save Setup changes.
Invalid configuration
information – run Setup
program One or more system configuration parameters are
not properly set. Start Setup, set them correctly, and
exit and save to update the parameters.