NEC Versa 2500 Series, Руководство пользователя

Страница: 108 / 167

4-36 Using Your NEC Versa Computer
„
In the Main program group, double click Windows
Setup. From the Options pull-down menu, select
Change System Settings.
„
Press the down arrow next to the mouse field. Locate
and highlight the following line:
Mouse Systems serial or bus mouse
„
Press OK.
„
Press Current (if available).
„
Press Restart Windows.
To use the serial mouse functions to regain use of the Ver-
saGlide, follow these steps. (If you restarted your system
with no mouse attached, go to the next section.)
1.
From the Main group, double click Windows Setup.
From the Options pull-down menu, select Change Sys-
tem Settings.
2.
Press the down arrow next to the mouse field. Locate
and highlight the following line:
Synaptics Touchpad
3. Press OK. Press Current (if available). Press Restart
Windows.
Once Windows restarts, the VersaGlide is enabled and
the serial mouse is disabled.
If you boot your system with no serial mouse attached and
would like to regain use of the VersaGlide, proceed as
follows:
1. From the Windows Program Manager, press Alt-F4 and
Enter
.