NEC Versa 2000 Series, Инструкция по обслуживанию и справочник

Страница: 49 / 82

SECURITY OPTIONS
The system supports two types of passwords for system security:
!"
system password
!" keyboard lock hotkey.
The following contains instructions for setting and using the password feature.
System Password
Use the system password to lock the system at power-on. The system password is set using
Auto Setup. This locks the keyboard to prevent unauthorized access to the system. When a
system password is set, the password must be entered before entering Auto Setup. This
feature allows only authorized access to system parameters.
Set an initial password as follows.
1.
Select the Keyboard menu option in Auto Setup.
2. S elect “System Password” on the Keyboard parameter menu in Auto Setup.
3. Select “Enter and Enable”.
4.
At the prompt, enter up to seven characters in length and press Enter . Another
window appears with a prompt to re-enter the password for verification.
5.
Re-enter the password and press Enter . Auto Setup returns to the Keyboard
parameter menu.
6. Save the changes and return to the initial summary screen.
7. Exit Auto Setup and save the changes.
NOTE: Once a system password is entered, it
cannot be edited or disabled in Auto Setup. See
procedures for removing or replacing a password
later in this section.
Using the System Password
After setting the initial password, a password prompt appears each time the system is
powered on. The password prompt is a key icon. The key icon appears after the completion
of POST.
To use the password, boot the system by powering the system off and then on. At the
password prompt (key icon), enter the password and press
Enter
to load the operating
system or to enter Auto Setup.