NEC UNIVERGE NEAX 2000 IPS, Общее описание устройства, Страница: 153 / 191

CHAPTER 6 INSTALLATION, PROGRAMMING, AND MAINTENANCE
UNIVERGE NEAX 2000 IPS General Description
Page 149
Issue 5
System Administration
In this system, the Customer Administration Terminal (CAT) or Maintenance Administration
Terminal (MAT) is used for programming the system data. The CAT is a digital multi-function
telephone (Dterm) which is equipped with function keys, a dial pad and LCD and interfaces with
the system via the MP card. The Maintenance Administration Terminal (MAT) is a personal
computer that provides an interface to the PBX via the system CPU card. The MAT PC must
have the MATWorX
TM
program properly installed to communicate with the PBX. MATWorX
is required for system software registration and activation.
Password Entry
In a system with password service, a maintenance person is required to enter an authorization
level number (Password Level) and appropriate password prior to engaging in programming the
system data with the MAT/CAT. A maximum of eight (8) Password Levels can be set up. The
number of commands that the maintenance person can access is determined by the Password
Level.
Resident System Program
This resident system program generates system data automatically according to the system
hardware configuration, thereby providing immediate operation and shorter programming time.
When activated, the system scans hardware configuration (such as line/trunk card location) and
assigns the system data (such as station numbers, trunk numbers, etc.) according to a
predetermined generic program assignment.
Service Conditions
1. This service is applicable for equipment installed in PIM0 through PIM3.
2. Data for any vacant slot is not assigned.
3. Virtual stations are not assigned.
4. A line/trunk card (PN-AUCA/PN-DK00/ /PN-4DAT/PN-4RSTF/PN-4VCTI) is not
assigned, even if mounted.
5. An application card is not assigned, even if mounted.
6. No tenant assignment is provided. (Tenant 01 is assigned)