NEC UNIVERGE NEAX 2000 IPS, Общее описание устройства, Страница: 121 / 191

CHAPTER 5 FEATURE DESCRIPTION
UNIVERGE NEAX 2000 IPS General Description
Page 117
Issue 5
Fax Arrival Indicator
When a call from a C.O. line (Direct-Inward-Termination, Direct-Inward-Dialing, Automated
Attendant), station or tie line has terminated to a facsimile machine, a related lamp on a pre-
designated Multiline Terminal is caused to light, indicating reception of a facsimile call.
FAX over IP
This feature allows the system to transmit facsimile communications over IP network, via Local
Area Networks (LAN) and corporate Wide Area Network (WAN). Since PBX regards facsimile
equipment as one of ordinary telephones, IP Packet Assembler/Disassembler (IPPAD) and Voice
Compression Trunk (VCT) are required for facsimile uses over IP network same as legacy
stations. The facsimile transmission procedure (T.30 or G.711/G.726 pass-through) is supported
with IP-PAD/VCT.
Feature Activation from Secondary Extension
This feature allows the Multiline Terminal user to access an appearance of another extension and
program certain features from that extension.
Flexible Line Key Assignment
Multiline Terminals can have any desired line-key assignment. This feature permits assignments
to be tailored to each individual's needs. (The terminal's primary extension line appearance is the
only line key that cannot be reassigned.)
Flexible Numbering Plan
The UNIVERGE
NEAX
2000 IPS has a Flexible Numbering Plan. All access codes and station
numbers and can be assigned in system programming. Refer also to the Single Digit Dialing
Features and Specifications, which further increases the flexibility of the system.
Flexible Ringing Assignment
This feature allows lines on Multiline Terminals to be individually programmed to ring or not
ring.
Forced Account Code
This feature forces the user to enter an Account Code (up to 8 or 10 digits) for all outgoing calls.
The Account Code must be dialed before dialing the outgoing number. Calls are processed only
when the dialed Account Codes are valid.
Group Call by Pilot Number Dialing
This feature allows a Station User (Multi-line Terminal/Single Line Telephone/PS) or a Trunk
Party to page a group of Stations simultaneously by dialing a Pilot Number. The maximum of 32
Stations can be assigned to a Paging Group, and the Paging Group is associated with the Pilot
Number. After one of the Paged Stations answers, the paging becomes a 2-Way calling between
the Calling Party and the first answered Station and automatically stops paging other Stations.
Group Listening
When a Multiline Terminal user makes a call using the handset, pressing the SPKR key will
allow others to listen through the built-in speaker of the Multiline Terminal. The user may
continue talking on the handset at the same time.
Hands-free Answerback
This feature allows the station user to answer a voice call without lifting the handset.