NEC TM1200, Руководство пользователя

Страница: 82 / 134

4-8 Upgrading Your System
CPU Installation Procedures
CAUTION
If you install a second CPU on your system it must be
identical to the first one (same stepping, same speed, same
cache size)
1. Pull the lever sideways away from
the socket. Then, raise the lever up to
a 90-degree angle.
2. Locate Pin 1 in the socket and look
for the white dot or cut edge in the
CPU. Match Pin 1 with the white
dot/cut edge. Then, insert the CPU. It
should insert easily.
3. Press the lever down to complete
the installation.
CAUTION
Electrostatic discharge (ESD) can damage components;
place them on an antistatic surface. Modify the system board
using an antistatic wrist strap attached to chassis ground.
WARNING
If the system has been running, any processor and heat sink
already installed on the board will be hot. To avoid the
possibility of a burn, let the components cool for 10 minutes
before continuing with the procedures described here