NEC SuperScript 4200N, Онлайн руководство пользователя

Страница: 79 / 128

NetWare 3.x 71
NETWORK SETUP
N
ET
W
ARE
3.
X
Complete these basic tasks to configure NetWare 3.x bindery-
based services for your printer.
note:
Before loging into the server, you must install
IntranetWare Client 2.2 or later. Refer to Novel
documentation for instructions on how to install the
client.
1. Log in to NetWare 3.x with Supervisor rights and start
PCONSOLE.
2. Define the Print Queue.
a. Select Print Queue Information from the Available
Options menu and press
ENTER
.
b. Press
INSERT
, type a name for the new queue to be
serviced by the NIC and press
ENTER
. Press
ESCAPE
to return to the Available Options Menu.
3. Define the Print Server.
a. Select Print Server Information from the Available
Options menu and press
ENTER
.
b. Press
INSERT
, type the NIC Print Server Name and
press
ENTER
.
note:
The Print Server Name you enter should match
the name shown on the Network Settings page under
Novell Network Information.
4. Define the Printer.
a. Press
ENTER
with the new Print Server Highlighted,
select Print Server Configuration and press
ENTER
,
then select Printer Configuration and press
ENTER
.
b. In the Configured Printers list, select an unused
printer number and press
ENTER
. In the Printer <#>
Configuration screen, define a new name for the
printer if desired. (The printer name is displayed in
various NetWare printing messages.)
c. Press
ESCAPE
to exit and select Yes to save the
changes. Press
ESCAPE
again to return to the Printer
Server Configuration menu.
5. Assign the Print Queue.
a. Select Queues Serviced By Printer and press
ENTER
. Highlight the desired printer on the Defined
Printers list and press
ENTER
.
b. Press
INSERT
to display the Available Queues list.
Select the desired queue and press
ENTER
. Assign a
Priority level (recommended choice is 1) and press
ENTER
.
c. Press
Alt-F10
to exit PCONSOLE.
6. Configure the network printer using MAP and the
Network Administration Page. The instructions are
shown on page 70.
7. Confirm Successful Configuration.
a. Turn the printer off and on and wait for a Network
Settings page to print. If the network is large, this
may take several minutes.
b. The Novell Connection Information area on the
Network Settings page displays the printer name, file
server, queue, etc. If it displays Attached: Yes , this
confirms that the NIC Print Server is ready to accept
print jobs. If not, verify that the Print Server name
matches exactly the Print Server name that was
entered in PCONSOLE.
8. Install and Configure Your Printer Driver
In Windows, use the Add Printer feature to install and
configure a SuperScript 4200N printer driver in each
workstation that will access the network printer.
note:
SuperScript 4200N printer drivers are on the
SuperScript 4200N CD that comes with the printer.
Specify that the printer will be attached as a Network
Printer
, and set the Port to the printer queue you just
created. (The Windows NT 4.0 driver installs automatically to
LPT1.
After installation, you can manually reset the port to
your NetWare queue.)