SOPHO
IP 5000/SOPHO IP6000
Command Reference Guide
76
Using the
modem auto-answer
command, you can set the answering mode to
auto-answer. Using the
undo modem auto-answer
command, you can set the
answering mode to manual answer.
By default, the answering mode is manual answer.
This command is valid for the AUX interface and other asynchronous interfaces
but not for the console interface.
When taking the modem dial-up connection approach, the user should first set
the modem parameters on the involved user interface.
Example
Set the answering mode to auto-answer.
[NEC-PHILIPS-ui-aux0]
modem auto-answer
modem timer answer
Syntax
modem timer answer seconds
undo modem timer answer
View
User interface view
Parameter
seconds
: Timeout time in the range of 1 to 60 seconds.
Description
Using the
modem timer answer
command, you can set the timeout time
waiting for the carrier signal after the off-hook action for setting up an inbound
connection. Using the
undo modem timer answer
command, you can restore
the default waiting timeout time.
The waiting timeout time defaults to 30 seconds.
This command is valid for the AUX interface and other asynchronous interfaces
but not for the console interface.
Example
None
parity
Syntax
parity { none | even | odd | mark | space }
undo parity
View
User interface view
Parameter
none
: Implements no check.
even
: Implements even parity check.
odd
: Implements odd parity check.
mark
: Implements mark check.
space
: Implements space check.
