NEC Ready 9734ES Pro Скачать руководство пользователя | Manualshive

Страница: 9 / 76

background image

Graphics Board

Ethernet models come with a Diamond graphics board preinstalled. The board is a high-performance PCI
graphics board specifically designed for exceptional graphics and superior quality full-screen, full-motion
video. The board uses the Trident™ 3DImàge975™ video controller.

Diskette Drive

The system comes standard with a 1.44-MB high-density diskette drive pre-installed in the 3 1/2-inch
accessible device slot (drive A). The drive is connected to the system board via a two-connector cable.

Hard Disk Drive

The system supports up to three IDE hard drives, the standard hard drive and two optional hard drives. The
standard hard drive is either a 3.2-GB, 4.3-GB, or 6.4-GB drive.

CD-ROM Reader

The reader can be used to load programs from a CD or it can be used to play audio CDs. The reader operates
at different speeds depending on whether the CD contains music or data. The reader is fully compatible with
Kodak Multisession Photo CDs™ and standard CDs.

The reader is connected to the secondary IDE/PCI port on the system board.

Power Supply

The 200-watt power supply is mounted inside the system unit. It supplies power to the system board, option
boards, diskette drives, hard drives, keyboard, and mouse. A fan inside the power supply provides system
ventilation. The power supply has several cables for attaching to the various devices requiring power.

Power Management

The Advanced Power Management (APM) program, located on the 430TX System Controller (MTXC) chip,
reduces system power consumption when there is no activity detected from the keyboard, mouse, diskette
drive, CD-ROM reader, or hard disk drive after a pre-defined period of time. As soon as activity is detected,
the system resumes where it left off.

In the CMOS Setup utility, an inactivity timer is available for setting the length of time before the system enter
a low-power mode.

«
...
7
8
9
10
11
...
»

Содержание Ready 9734ES Pro













































































Отзывы:

Нет отзывов

Похожие инструкции для Ready 9734ES Pro

Бренд: IBM Страницы: 78

Бренд: IBM Страницы: 90

Elements Workstation 3 Person Run

Бренд: Jason.L Страницы: 5

Бренд: Radio Shack Страницы: 52

kontron KBox B-201-CFL

Бренд: S&T Страницы: 72

Бренд: Gateway Страницы: 108

NUC 11 Performance

Бренд: Intel Страницы: 20

Бренд: MSI Страницы: 123

DeviceEdge Mini AIE-C011

Бренд: Aetina Страницы: 14

iDEQ-T1 IN294KT1

Бренд: Biostar Страницы: 53

Бренд: XPLORE TECHNOLOGIES Страницы: 2

Бренд: Aaeon Страницы: 44

Power Panel 300

Бренд: B&R Industries Страницы: 612

Бренд: A1Touch Страницы: 9

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды