manualshive.com logo in svg

NEC Ready 9734ES Pro, Инструкция по обслуживанию и справочник

Поделиться
Скачать
NEC Ready 9734ES Pro Скачать руководство пользователя страница 49

 

Speaker Assembly Removal

Remove the speaker per Figure 5-5 and the following steps.

Remove the system unit cover as previously described.

Unplug the speaker from its connector on the system board.

Slide the speaker over the raised spot and out from the speaker tabs.

Remove the speaker from the system unit.

Figure -5 Locating the Speaker and Card Guide/Fan Assembly

 

Card Guide and Fan Assembly Removal

Remove the card guide and fan assembly per Figure 5-5 and the following steps. 

Remove the system unit cover and front panel assembly as previously described.

Unplug the fan from its connector on the system board.

At the front of the system unit, press in on two of the four locking tabs securing the assembly to the chassis.

Pivot the assembly away from the chassis, and remove it from the system.

Remove the fan from the card guide by pressing outward on the four tabs securing the fan to the guide.

 

System Lamp Removal

Содержание Ready 9734ES Pro













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды