NEC POWERMATE, Руководство по обслуживанию

Страница: 60 / 195

Setup and Operation 2-17
See the sections following the table for a description of Main Menu parameters from the
summary window.
Table 2-2 Main Menu Parameters
Parameter Options Description
System Time HH:MM:SS Sets the system time.
System Date MM/DD/YYYY Sets the system date.
Diskette A:
Diskette B: 360KB, 5 1/4”
1.2MB, 5 1/4”
720KB, 3 1/2”
1.44MB, 3 1/2”
2.88MB, 3 1/2”
Not Installed Selects the type of diskette drive in the system.
Video System EGA/VGA (default)
CGA 80x25
Monochrome Selects the default video device.
Memory Cache Enables and disables the installed cache.
Memory Shadow Enabled (default) Displays the amount of conventional memory
detected at power-on.
Boot Options Selects the default boot options.
System Memory Automatically detected
by the system Displays the amount of conventional memory
detected at power-on.
Extended Memory Automatically detected
by the system Displays the amount of extended memory
detected at power-on.
IDE Adapters
IDE adapters control the IDE devices, such as IDE hard disk drives and IDE CD-ROM
readers, in the system. The system uses two IDE controllers integrated on the system board.
Setup supports up to four IDE devices, with an IDE adapter for each of the following
configurations:
1 Master
1 Master, 1 Slave
2 Masters
2 Masters, 1 Slave
2 Masters, 2 Slaves
The factory installed master/slave combination for configurations with an IDE hard disk
connected to the primary IDE/PCI port is “1 Master.” If a second hard disk is added to the
primary IDE/PCI port, the combination becomes “1 Master, 1 Slave.”