Using Voyetra Sound Software 3-11
3.
To hear the file, press the Audition button. If Auto
Audition is enabled, you automatically hear each file as
you select it.
4.
To open a file, double-click on its file name and choose
OK.
After the file loads, a graphic display of the audio file
fills the Graphic File Display.
5.
Click the Play button in the Transport Controls area.
The digital audio file plays and stops when it reaches the
end.
Editing .WAV Files
To edit digital audio files, use the following procedure.
1.
Select the range that you want to manipulate by holding
the mouse button down as the passage plays.
2.
Release the button at the end of the desired section.
3.
Click the Stop button.
4.
You can then manipulate this section as you require.
5.
To cut the section, select Cut from the Edit menu.
6.
To paste the section you just cut to a different part of the
.WAV file, click on where you want to paste the portion
and select Paste from the Edit menu. The portion that
you previously cut is pasted in the new position.
7.
Play the file to check your results.
Содержание POWERMATE
Страница 115: ...Index 5 ...