NEC PowerMate VT 300i Series, Инструкция по обслуживанию и справочник

Страница: 37 / 190

System Configuration 2-11
Main Menu Items
Menu Item Settings (default is bold)
Cache RAM This field is read-only and cannot be changed from the BIOS Setup
utility.
Example: 128 KB
Total Memory This field is read-only and cannot be changed from the BIOS Setup
utility.
Example: 32 MB
DRAM Bank 0
DRAM Bank 1 These fields are read-only and cannot be changed from the BIOS
Setup utility.
Example:
DRAM Bank 0 32 MB SDRAM
DRAM Bank 1 None
System Date Set system date in this field. Press Tab or Enter to move between
month, date, and year fields.
Example:
Jan 20 1999
System Time Set system time in this field. Press Tab or Enter to move between
hour, minute, and second fields.
Example: 09:30:00
Floppy Drive A: Disabled
360 KB 5 1/4"
1.2 MB 5 1/4"
720 KB 3 1/2"
1.44/1.25 MB 3 1/2"
2.88 MB 3 1/2"
Floppy Drive B Not Installed
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave Device type, Auto
Device type, Auto
Device type, Auto
Device type, Auto
Each device menu item displays the Hard drive or CD-ROM
identifier if a device is installed.
If you install a hard drive that does not feature auto IDE type
detection or your IDE hard drive was formatted on another system
with parameters different from those reported by the drive, enter a
parameter for each of the fields in the device submenu.
Bring up a device submenu by pressing Enter. The submenus
include Type, Cylinders, Write Precompensation, Heads, Sectors,
LBA Mode, Block Mode, Fast Programmed I/O Modes, and 32-Bit
Transfer Mode. Each mode is briefly described in the following.