NEC POWERMATE VT 300 RELEASE NOTES, Руководство пользователя

Страница: 55 / 192

Configuring the System 3-15
Advanced Menu - Power Management Setup
Menu Item Settings (default is bold)
Restore on AC/Power Loss Stay Off, Power On, Last State
The Power On setting turns power on after a
power loss. Jumper JP1 must be set for
Power On (see “Setting System Board
Jumpers” for procedures on setting JP1).
Ring Resume from Soft Off Disabled, Enabled
The Disabled setting causes the system to
ignore any incoming call from a modem.
Enabled allows the system to boot up on an
incoming telephone call. Not supported on
Windows 98 systems.
LAN Resume from Soft Off
Disabled, Enabled
The Disabled setting causes the system to
ignore any incoming signal from the LAN
network board. Enabled allows the system to
boot up on an incoming LAN signal from the
network board.
RTC Alarm Resume from Soft
Off Disabled, Enabled
When Enabled, you can choose the time the
system boots up (see the following time
settings).
RTC Alarm Date Sets the day that the system boots up (when
RTC Alarm Resume is Enabled).
RTC Alarm Hour Sets real time clock alarm hour (when RTC
Alarm Resume is Enabled).
RTC Alarm Minute Sets real time clock alarm minute (when RTC
Alarm Resume is Enabled).
RTC Alarm Second Sets real time clock alarm second (when RTC
Alarm Resume is Enabled).