NEC POWERMATE VT 300 RELEASE NOTES, Руководство пользователя

Страница: 108 / 192

Installing Options 4-27
2.
Align the cartridge with the top of the retention
mechanism so that the notch in the cartridge connector
aligns with the key in the Slot 1 connector (see the
following figure).
3.
Insert the cartridge into the retention mechanism and
evenly press down on the cartridge until it is fully seated
in the Slot 1 connector.
4.
Lock the cartridge in place by pressing out on the two
locking tabs.
5. For systems using the top bar, install it as follows.
!
CAUTION
Use caution when inserting the top bar to prevent
damage to the plastic clips on the DIMM socket.
„
Insert the bar into its pins on the retention mechanism
and the heat sink. The flat side of the bar goes against
the flat side of the bottom bar.
„
Install the previously removed DIMM module (see
“Installing DIMM Modules” earlier in this chapter).